Skip to Content

Getting your systems ready for tourist season

What to fix in the off-season, and the warning signs to look for before spring break
November 19, 2026 by
Getting your systems ready for tourist season
Dee, the DES mascot, ready for the job

Short version: the slow months are the time to fix your Wi-Fi, cameras, POS and power. Once spring break starts, every hour of downtime costs you guests, sales and reviews.

Spring break brings the first big wave to the Emerald Coast in March, and summer runs hot from Memorial Day to Labor Day. Every network, camera, TV and phone system you own gets its hardest workout of the year in those months. Problems that are a nuisance in January become lost sales and one-star reviews in July.

Here is what we check for restaurants, hotels, condo associations, vacation rentals and retail shops before the crowds arrive, and the warning signs that tell you something will not make it through the season.

What to get ready

Wi-Fi and the network

  • Plan for a full house. A rental that sleeps 10 can have 30 or more phones, tablets, laptops, TVs and game consoles on Wi-Fi at once.
  • Keep guests on their own network, separated from your POS, cameras and office computers.
  • Change the guest Wi-Fi password and update the signs and welcome books to match.
  • Install firmware updates on firewalls, switches and access points now, not mid-season.

Backup internet

  • One fiber or cable line is a single point of failure. A 5G or LTE backup with automatic failover keeps card payments and reservations running when the main line drops.
  • Test the failover. Unplug the main line on a slow afternoon and make sure the backup actually takes over.

Point of sale and payments

  • Put card terminals and POS stations on wired connections wherever you can.
  • Confirm offline or store-and-forward mode is turned on, and that staff know how it works.
  • Replace worn receipt printers and card readers before the rush, not during it.

Cameras and security

  • Check that every camera is recording and that you can pull up footage from last week. Spot-check pool, parking, entrances and register areas.
  • Clean salt and sand off outdoor lenses. Salt haze ruins night video.
  • Confirm the recorder keeps enough days of video, and that alerts reach the right phones.

Door access and smart locks

  • Clear out old guest and contractor codes, and set up automatic code changes between stays.
  • Replace lock batteries before they warn you. A dead lock at 11 p.m. on check-in night is the worst call to get.
  • Remove access for staff who will not be back this season.

TVs, music and AV

  • Test every TV, remote, streaming box and soundbar. Reset guest logins on streaming apps.
  • Set background music zones and volume schedules for patios, pools and dining rooms.
  • Check projectors and conference room systems before group bookings and events start.

Phones

  • Update greetings and after-hours messages with seasonal hours.
  • Check call routing and ring groups for new staff, and set overflow so calls do not ring forever during the rush.

Power and the equipment closet

  • UPS batteries usually last 3 to 5 years. If yours is beeping or older than that, replace it now.
  • Add surge protection on network gear, POS and AV. Summer afternoon storms here are frequent and hard on electronics.
  • Make sure the closet stays cool. A closet that is warm in March will cook equipment in August.

What to look for: warning signs

  • Guest reviews mention the Wi-Fi. If last season's reviews say "slow" or "kept dropping", it will be worse with more people.
  • The POS hangs during the dinner rush. Slowdowns at peak usually point to the network or internet, not the POS itself.
  • Gaps or blank video in camera footage. Often a failing hard drive or a camera that went offline months ago.
  • Equipment that no longer gets updates. Unsupported firewalls and access points are a security risk and a common cause of mystery outages.
  • Anything that needs a daily reboot. A device that works only after a restart is close to failing.
  • A messy or hot equipment closet. Unlabeled cables and heat make every service call slower and every failure more likely.

A simple off-season timeline

WhenWhat to do
November to JanuaryWalk through every system, list what is failing, get quotes
FebruaryFinish installs and upgrades while it is quiet
Early MarchTest everything before spring break
MaySecond check before Memorial Day weekend
Before June 1Hurricane season prep: surge protection, UPS, backups and a shutdown plan
Dee giving a thumbs up

Book a pre-season systems check

DES checks your network, cameras, access control, AV, phones and power, then gives you a punch list before the crowds arrive. Built to BICSI Standards serving Destin, the Emerald Coast, Mobile, Huntsville and Atlanta.

Request a check or call 850-502-8567
Tech jargon decoder: the terms on a low-voltage quote
Plain-English meanings for the cabling, network, security and AV terms you will see on a proposal